Other Tools

We Provide Calcium Silica Pipes, Calsil Pipes, 650 Degrees, Calsil Insulation, ID 62-460 mm, Thickness 40-50 mm, Length 600 mm, ASTM C533 TYPE l.

We Provide ASTM C533 TYPE l Calcium Silica Pipes, 650 Degree Calcium Silica Pipes, ASTM C533 TYPE l, ID 62-460 MM, THK 40-50 MM, Length 600 MM.

We Provide 3LPE Heat Shrink Sleeves, 3LPE Heat Shrink Sleeves for 12 Inch Pipes, OD 323.9 MM, Width 500 MM, Thickness 2.5 MM.

We Provide Bourdon Type Pressure Gauge, Bourdon Type Pressure Gauges, 1/2 Inch, DN15, 0-30 kg/cm2, Threaded End, Bottom Entry.

We Provide Insulating Washers with Standard Thickness of 1/8 Inch, DN4, and Fitting Insulating Sleeves in a Full Range of Bolts and Nuts.

We Provide API 5CT K55 OCTG Casing, K55 OCTG Casings, API 5CT, 5-1/2 Inch, BTC Ends, Length R2, Thickness 15.5 PPF, ISO Qualified OCTG Pipe Mills.

We Provide Ductile Iron Pipe Collars, DI Pipe Collars, ISO 2531-K9 Flange with 2 Rubber Gaskets, Black Coating, and Customized Length.

We Provide ASTM A105 Forged Nozzles, ASTM A105 Forged Nozzles, Impact Tested at a minimum of -10℃, Dimension according to the Client's Drawing Requirement.

We Provide Thermodynamic Steam Traps, SW Ends Thermodynamic Traps 27 Bar Saturated Steam, ASTM A105, Class 600 LB, PN100, 1 Inch, DN25.

We Provide ASTM A105 Thermodynamic Superheated Steam Traps, Thermodynamic Steam Traps, 1 Inch, DN25, 1500 LB, PN250, ASTM A105, Socket Welded.

We Provide AISI 4130 Double Studded Adapters, AISI 4130 Double Studded Adapters, 3-1/16 Inch, 3-1/8 Inch Flange, 5000 PSI, PSL-2, Ring Groove, With Studs.

We Provide Stainless Steel Dry Pressure Gauges, SS Dry Pressure Gauges, 1/2 Inch, DN15, 10 bars, Stainless Steel, and a 63 MM Case.

We Provide Temperature Gauges, 1/2 Inch Temperature Gauges, DN15, 100 MM Case.

Wrap-Around Shrink Sleeve Manufacturer: Wrap-Around Shrink Sleeve for 3LPE Field Coating, Width 500 mm, THK 2.5 mm, Customized Dimension.

ASME SA516 Grade 70 Dish Ends Manufacturer: ASTM A516 GR.70 Dish Ends for Horizontal Tanks, Diameter 64 Inch, 1600 mm, Thickness 10 mm.

Piping Flange Isolation Kits Manufacturer: Flanged Isolation Products, Isolating Sealing Gaskets, Sleeves, Washers, Type E, F Full Face Gasket.

ASTM A36 Water Storage Tank Manufacturer: ASTM A36 Water Storage Tanks, ID 1100 * 3650 mm, 750 Gallons, Customized Design Dimension.

ASTM A516 Gr 70 Ring Type Pipe Spacers Factory: ASTM A516 Gr 70 Pipe Spacer, Ring Type, DN750, 30 Inch, Class 600 LB, ASME B16.47, ASME B16.48.

Pre-Galvanized Scaffold Cross Brace Factory: Pre-Galvanized Q195 Scaffold Cross Braces, Hight 4 Inch, Width 6 Inch, Length 2198 MM, Q195.

Forged Right Angle Scaffold Clamp Provider: Forged Right Angle Scaffolding Clamps, OD 48.3 mm, Electro-Galvanized, Q235.

Scaffolding Screw Jack Base Supplier: Electro-Galvanized Scaffold Screw Jack with Base, M 38 x T 4.0 x H 600mm, Q235, 150 x 150 x 5mm Base, Base Length 0.6m.

Q195 Scaffolding Ladder Manufacturer: Pre-Galvanized Scaffolding Ladders, Q195, 9 steps, 450mm x 2677mm, 2515mm x H 1725mm.

Q195 Scaffolding Walking Board Factory: Q195 Pre-Galvanized Walking Board, Scaffoldings Box Support, 500m x 1.829m, W=50mm x T=1.2mm with 43mm Hook.

Q195 Scaffolding Provider: Pre-Galvanized Scaffoldings, Q195, Frame Length 0.758 m x H 1.700m, Tube Length 42 x 1.8 mm, Inner Tube 25 x 1.2mm.

Q195 Pre-Galvanized Scaffolding Supplier: Q195 Scaffoldings, Pre-Galvanized Square Pipes, 60 x 60 mm x 2.5 m, THK 2.3mm, Q195 Material.

Carbon Steel Scaffolding Manufacturer: Carbon Steel Scaffolding, Hot Dipped Galvanized Scaffolding Pipes, OD 48.6mm, Length 2.5m, THK 2.4mm.

Hot Dip Galvanised Lighting Pole Manufacturer: M.S HDG Lighting Poles with Single-Arm, Powder Coated, Tubular Conical Curve, THK 5 MM, 11 Meters.

API 5L Gr. B Pig Signaller Factory: Pig Signallers with Thread O-Ring, Manual Indicator, Remote & Flameproof Type and Flanges, 16 Inch, THK 7.92mm, API 5L Gr. B.

Stainless Steel Plain Washer Provider: SS 304, SS 316 Plain Washers, Stainless Steel, Carbon steel, Aluminum, Brass, Zinc Plated, M3-M100, DIN 125.

Stainless Steel Strip Supplier: Stainless Steel SS 304, 304L, 310S, 316, 316L, 321, 430, 309S, 904L Strips, THK 0.1-20 mm, Length 10-12000 mm.